Here are the rules I have put in place for the VPN: I can access the VPN from the LAN side.įrom outside the local network, I get an error message saying 'the remote server is not responding' and mentioning the possibility of NAT or firewall issue. The server's LAN side address is 192.10.0.100.

Create the VPN User for Road Warrior Access.I have configured Windows Server 2016 for a L2TP VPN connections via pre-shared key./ip firewall nat add action=masquerade chain=srcnat out-interface=ether1 src-address-list=VPN_POOL.Create the NAT for Client Internet Access.Create the Address List of the VPN Clients for Internet Access.

/interface l2tp-server server set enabled=yes ipsec-secret=IPSECPASSWORD use-ipsec=required./ppp profile add change-tcp-mss=yes local-address=192.168.60.1 name=VPN remote-address=VPN_POOL use-encryption=yes.Create the IP Pool for Dynamic IP Address Allocation.This guide assumes you already have the required ports and services (UDP500, UDP4500, UDP1701, and L2TP) allowed on the input chain of your MikroTik. In this example we are creating a L2TP with IPSEC server with dynamic IP Address allocation and a Masqurade SRCNAT rule using an address list for internet access.

Mikrotik l2tp firewall